________________________

Nyitvatartási idő :
Hétfőtől - Péntekig

09:00 - 15:00 óráig

info@elektronikus-cigaretta.hu

________________________

SZÁLLÍTÁS

Ingyenes szállítás

23.000Ft felett

A megrendelés szállítása

GLS.

23.000Ft alatt

a posta költség

1.750Ft

________________________

AKCIÓ

eGo AIO Joyetech

Ár 6300 Ft

________________________


Kezdőlap »Cartomizer, clearomizer» Eleaf iJust 2 BDC Clearomizer 5,5ml


        

Eleaf iJust 2 BDC Clearomizer 5,5ml

img

 

Cikkszám: 142
Típus és szín kiválasztása:
Megszerezhető pontok: 76 pont
Ár:
3 800,00 Ft
Termékfigyelő:
Termékfigyelő

Vásárolni kívánt mennyiség:
  db  

Termékváltozatok

Kép:
Cikkszám / Termék neve:
Raktáron:
Ár:
Eleaf EC porlasztófej 1db
253
Eleaf EC porlasztófej 1db
Ár 990,00 Ft
Eleaf iJust 2 üveg (glass) 1db
413
Eleaf iJust 2 üveg (glass) 1db
Ár 1 600,00 Ft

Just another sub-ohm tank? Not at all! eLeaf iJust 2 tank brings a number of unique improvements.

You might miss iJust 2 among other sub-ohm tanks at first glance, but that would be a real shame as eLeaf did not make just another sub-ohm tank, but managed to come up with several innovations.

Huge capacity for sub-ohm tanks is necessity, and therefore iJust 2 offers with 5.5ml enough space for your e-liqiud. Equally necessary is the proper airflow. iJust 2 tank has actually brought it to perfection and it is ideal for all the direct lung hit lovers. But if for any reason you felt the airflow is too loose there is a special airflow control ring for a tighter draw.

The fact that iJust 2 do not have a classic airflow control directly on the base as the vast majority of the tanks has a reason. eLeaf created a unique base for this tank. This design is supposed to remove the excess heat that it is building up at the base and thus the iJust 2 tank will not be so hot when heavily used.

Like most tanks, you can take iJust 2 fully apart, so it can be easily cleaned.

One of the main innovations comes with the heating heads. They are called EC and their resistance is 0,3Ω. Inside there is a vertical coil. But not just one, but two parallel vertical coils. That is what makes iJust 2 real vapor producing beast, which is, however, still capable of bringing the amazing e-liquid flavor.

Package contents:
1x iJust 2 mouthpiece
1x iJust 2 tank tube
1x EC heating head (0,3Ω)
1x iJust 2 tank base
1x iJust 2 airflow control ring
1x iJust 2 user manual

Parameters:
Length: 67.5 mm
Diameter: 22 mm
Capacity: 5.5 ml
Coil resistance: 0,3Ω (Dual)
Recommended wattage: 30W-80W
Thread: 510
Material: Stainless steel and Pyrex

Manufacturer: eLeaf

Instructions for refilling:
1. Turn the iJust 2 tank with the mouthpiece down and unscrew the bottom base.
2. Fill the clearomizer with your e-liquid - never more than is the threshold of the middle tube (which is intended as an air passage).
3. Screw the bottom base back.
4. Before using a new heating head we always recommend to wait a few minutes so the heating head had enough time to soak up the e-liquid.

Instructions for replacing heating head:
1. Turn the iJust 2 tank with the mouthpiece down and unscrew the bottom base.
2. Remove the old heating head from the base, and screw in the new one (always make sure that the head is properly tightened at the base).
3. Screw the bottom base back.
4. Before using a new heating head we always recommend to wait a few minutes so the heating head had enough time to soak up the e-liquid.to soak up the e-liquid.

TIP: We recommend a few drops of e-liquid directly on the cotton in the new heating head.

ZDgzNGM
Termékfigyelő
Watch DOG


Tájékoztatást kérek e-mailben az alábbi esemény(ek)ről:


       Ha a termék ára ez alá csökken: Ft

        Ha a termék elérhetővé válik készleten


E-mail címem: